Conventional V Belts A B C D E Sections

Kevlar Belts | Serpentine Belt | V Belt

Mechanics, Millwrights, Engineers!!!
Do You Need Conventional V Belts-A, B , C D, E Section for Auto, Tractors, Combines, Construction & Industrial Equipment?
You Can Benefit from:

  1. The Largest Online New Kevlar V Belt Store in the USA
  2. Seeing Pictures, Prices, Descriptions, and Availability before you buy
  3. Paying Up to 50% less than Dealer Prices
  4. The lowest freight rates from UPS, DHL, and other couriers.

    Call Easy Tractor Parts (1-877-668-7278)

The most popular Classical V Belt profiles are the A, B, C, D and E Profiles. These five profiles of V belts are different in their dimensions of cross section area, height, and width. Depending on the application, measuring your old v belt will determine which of these five profiles will suffice for your application.Conventional V Belts are the A, B, C, D and E Sections

V Belt

V Belt

 

Belt Section Width Height Minimum Length Maximum Length
mm in mm in mm in mm in
A 13 1/2 8 5/16 480 17 5200 200
B 17 21/32 11 13/32 560 22 11200 441
C 22 7/8 14 17/32 900 35 11200 441
D 32 1 1/4 19 3/4 1900 75 13700 540
E 38 1 1/2 23 29/32 3000 118 13700 540

Classical Wrapped V Belts

A-Section Classical Wrapped V Belt
B-Section Classical Wrapped V Belt
C-Section Classical Wrapped V Belt
D-Section Classical Wrapped V Belt
E-Section Classical Wrapped V Belt

Classical A Section V Belt Profile

Th A profile is half of an inch (1/2″ ) in width, and five sixteenth ( 5/16″) in overhaul height. In metric units, this is 10 millimeters (mm) in width, and eight (8) millimeters (mm) in total height. The lengths of the belt can be anywhere from a minimum of seventeen (17) inches, ( or 480 mm), to a maximum of 200 hundred (200) inches (which is 5200 mm).

Classical B Section V Belt Profile

Th B profile is 21/32″ in width, and 13/32″) in overhaul height. In metric units, this is 17 millimeters (mm) in width, and eleven (11) millimeters (mm) in total height. The lengths of the belt can be anywhere from a minimum of twenty two (22) inches, ( or 560 mm), to a maximum of four hundred and forty one (441) inches (which is 11200 mm).

Classical C Section V Belt Profile

Th C profile is seven eight (7/8″ ) in width, and seventeen thirty second (17/32″) in overhaul height. In metric units, this is 22 millimeters (mm) in width, and fourteen (14) millimeters (mm) in total height. The lengths of the belt can be anywhere from a minimum of thirty five (35) inches, ( or 900 mm), to a maximum of four hundred and forty one (441) inches (which is 11200 mm).

Classical D Section V Belt Profile

Th D profile is one and a quarter of an inch (1 1/4″ ) in width, and three quarters (3/4″) in overhaul height. In metric units, this is 32 millimeters (mm) in width, and nineteen (19) millimeters (mm) in total height. The lengths of the belt can be anywhere from a minimum of seventy five (75) inches, ( or 480 mm), to a maximum of five hundred and forty (540) inches (which is 13700 mm).

Classical E Section V Belt Profile

Th E profile is one and a half inch (1 1/2″ ) in width, and twenty nine over thirty second (29/32″) in overhaul height. In metric units, this is 38 millimeters (mm) in width, and twenty three (23) millimeters (mm) in total height. The lengths of the belt can be anywhere from a minimum of one hundred and eighteen (118) inches, ( or 3000 mm), to a maximum of five hundred and forty (540) inches (which is 13700 mm).

Serpentine Belts V Belt